In this article let us learn How to Bridge Two Car Audio Amps in six easy steps and the advantages of bridging two car amplifiers with tips and warning for doing this job perfectly. Let us learn to get it right the first time itself because wrong connection may blow out the speakers or even burn the amps or sometimes in the worst case both may happen.
The easiest way to improve and enhance the sound of speaker is to connect two car amplifiers together . This also gives lot of power for bigger speakers such as woofers. We may need few things before we start doing this job . They are wrenches, pliers, wire strippers, wire rated for the amplifiers and of course the two amplifiers which we are planning to bridge.
Utmost care must be taken before buying the amplifiers. The manuals must be thoroughly read and must be made sure that both the amplifiers that are purchased can be bridged. If they can be bridged the amplifiers can be bought. If it is not sure then it is advised not to buy those.
Next step is to stop the power supply to the amps. Power supply to the amps can be stopped easily by disconnecting the positive cable from the battery of the car. This should be done before any connections are made. To remove the cable we may take help of the wrenches and pliers. Power supply should be completely stopped till our work is completely done .
There will be a bridge switch at the rear end of each amp usually. Turn on that switch in case if it is there. Take a wire . Remove the insulation to about half inch in both the ends of the wire taken.
The insulation is then stripped for half an inch from both the ends of the wire. The wire is then connected between the two amplifiers. In one it is connected in the positive end of an amplifier and the other end is attached to the negative of the second amplifier. This is done by wrapping wire so that it surrounds the terminals. Then the knobs are screwed back to position. Generally there is colour code for the two terminals. The colours for negative and positive are black and red respectively.
The speakers and the terminals in the bridged amplifier can be connected by the wire. The positive wire is connected to the terminal which is positive and in the same way negative is connected to the negative of the speaker.
This article would have proved to be effective in guiding us on How to Bridge Two Car Audio Amps by instructing and explaining all steps with useful suggestions and tips.
Looking to find the best deal on Auto Hifi, then visit www.powernetshop.at to find the best advice on Car audio for you.